Toshiba B-450-R manual Printer Unit Harness Rivet Sensor PCB LED

2. MAJOUR UNIT REPLACEMENT

EO18-33021

2.5. REPLACING THE MEDIA SENSOR

7)Detach the Printer Unit from the Bottom Cover.

Hook

Printer Unit

Bottom Cover

8)Disconnect the harness from the Sensor PCB (LED) which is attached to the bottom of the Printer Unit. Then remove the Rivet to detach the Sensor PCB (LED) from the Printer Unit.

Printer Unit Harness Rivet

Sensor PCB (LED)

9)Replace the Sensor PCB (LED) with a new one, and then reassemble in the reverse order of removal.

2- 16