2. MAJOR UNIT REPLACEMENT
(Revision Date: Dec. 16, 2008)
2.2 Replacing the LCD Unit
2.2Replacing the LCD Unit
1)Remove the Right Cover, Left Cover, Front Cover and CPU PC Board. (Refer to Section 2.1 Replacing the CPU PC Board.)
2)Remove the three screws, then remove the LCD Unit.
Screw
LCD Unit
3)Replace the LCD Unit with a new one, then reassemble in the reverse order of removal.
LCD Cable
4)After replacing the LCD unit, perform an LCD check in the system mode and make sure none of dots are missing. Regarding the procedures for the LCD check, refer to Section 4.2.4 in the System Mode Manual.
If the LCD does not display clearly, refer to Section 4.4.2 in the System Mode Manual and perform an LCD density setting.
When the LCD dots are missing, make sure the LCD cable is surely connected to the CPU PC board. If the connection of the cable is correct, the dot missing may result from the initial failure of the LCD and replace the LCD unit with a correct one.
All backlights off (3 seconds)
All backlights on (3 seconds)
