2. MAJOR UNIT REPLACEMENT
(Revision Date: Dec. 16, 2008)
2.10 Replacing the Platen Ass’y
2.11 Replacing the Platen Ass’y
1)Remove the Upper Sensor Cover. (Refer to Section 2.9 Replacing the Media Sensor (Upper).)
2)Release the Hooks, then remove the Platen Ass’y.
Platen Ass’y
Hook | Hook |
3)Replace the Platen Ass’y with a new one, then reassemble in the reverse order of removal.
NOTES:
1.After replacing the Platen, refer to the Setting Operation Manual or System Mode Manual and perform the following operations.
zPerform a RAM clear.
2.Perform a test print and make sure printing is even. (Refer to Section 4.6 in the System Mode Manual.) If the printing is uneven, make sure the platen ass’y is surely fixed with the hooks.
