Toshiba B-EV4D owner manual Care/Handling of the Media, Option

3. MAINTENANCE

ENGLISH VERSION EO1-33088

3.2 Care/Handling of the Media

3.1.5Strip Sensor/Strip Roller1. Wipe the Strip Roller with a soft cloth moistened with absolute

(Option)	ethyl alcohol.
	2. Remove dust or paper particles from the Strip Sensor with a dry soft
	cloth.

Strip Sensor

Strip Roller

3.2Care/Handling of the Media

CAUTION!

Be sure to carefully review and understand the Supply Manual. Use only media which meets specified requirements. Use of non- specified media may shorten the head life and result in problems with bar code readability or print quality. All media should be handled with care to avoid any damage to the media or printer. Read the guideline in this section carefully.

•Do not store media for longer than the manufacturer’s recommended shelf life

•Store media rolls on the flat end. Do not store them on the curved sides as this might flatten that side causing erratic media advance and poor print quality.

•Store the media in plastic bags and always reseal after opening. Unprotected media can get dirty and the extra abrasion from the dust and dirt particles will shorten the print head life.

•Store the media in a cool, dry place. Avoid areas where they would be exposed to direct sunlight, high temperature, high humidity, dust or gas.

•The thermal paper used for direct thermal printing must not have specifications which exceed Na+ 800 ppm, K+ 250 ppm and Cl- 500 ppm.

•Some ink used on pre-printed media may contain ingredients which shorten the print head’s product life. Do not use labels pre-printed with ink which contain hard substances such as carbonic calcium (CaCO3) and kaolin (Al2O3, 2SiO2, 2H2O).

For further information, please contact your local distributor or your media manufacturer.

E3- 3