Toshiba BCN002Z instruction manual Safety precaution, Handling in general

E6581402c

Limitation of use

Safety precaution

Never use this unit with any device other than TOSVERT VF-FS1 series inverters. Doing so may cause an accident.

Handling in general

	Danger
	Never disassemble, modify or repair the product.
	Disassembling the product may cause electric shocks, fire or injuries.
Never
	For repairs, call your sales/repair agency.
Disassemble
	Do not open the front cover on the inverter while the inverter power is on.
	It may lead to electric shocks.
	Do not remove this option from VF-FS1 while the power is on.
	It may lead to electric shocks.
Prohibited	Do not put or insert foreign objects such as waste cable, bars or wires into the product.
	It may lead to electric shocks or fire.

Do not splash water over the product, and do not wipe the body with a wet cloth. It may lead to electric shocks or fire.

	Turn off the power immediately in case of any abnormalities such as smoke, smell or
	abnormal noise.
	Neglect of these conditions may lead to fire.
Mandatory	For repairs, call your sales/repair agency.
	Do not touch the sharp portions (such as leads of parts on the board, the corner of board,
	or etc.) on this option.
	It may lead to injuries.
	Warning

Mandatory

This option is an electrostatic discharge sensitive device. Handle it, where the environment is protected against electrostatic electricity.

Otherwise, permanent damage to device will result.

Transportation and installation

Danger

Do not apply a dropping shock or other physical shocks.

Otherwise, damage or malfunction will result.

	Do not install or operate the inverter if it is damaged or any part of it is missing.
Prohibited	Operating a defective inverter may lead to electric shocks or fire.
	For repairs, call your sales/repair agency.

Do not put any flammable material near the product.

It may catch fire due to the product sparking in the case of a malfunction.

	Use this product under the environmental conditions prescribed in the instruction manual.
	Usage it under any other conditions may result in malfunction.
	An emergency stop device must be installed that fits with system specifications
	(e.g. shut off input power then engage mechanical brake).
	Operation cannot be stopped immediately by the inverter or this unit alone, thus risking an
	accident or injuries.
Mandatory	Install this option into VF-FS1 and secure it by tightening the terminal board fixing
	screws to the specified torque. Otherwise, it may cause the product falling, the damage,
	or malfunctions.
	When installing this option, do not touch its sharp portions such as leads of parts on the
	board, the corner of board or etc.
	It may lead to injuries.

- 2 -