28
a. If the Blu -ray Disc™ playe r is con nected to a
Wireless Network Using WPS Pushbutton:
2. Press / to select WiFi Protected Setup (WPS),
then press OK.
Connection to the wireles s Network using Wi-Fi II.
protected Setup(WPS)
1. Press / to select Network in stop mode, then press
button to enter the following screen:
Connection to the wireless Network using Manual III.
IP Confi guration
1. In the “Wireless” menu, press / to select Manual,
then press OK.
2. Follow the on-screen message to continue operating
the connection.
Password
WiFi-me
Press ENTER to open keyboard
Connect WPS Pin Cancel
Password is case-sensitive

WiFi Protected Setup (WPS)

Please press the button on your router now
Cancel
Network Name (SSID)
5. Use to highlight Connect, and press OK. I f the
wireless network is functioning, icon and a message
“Connection to XXX...Success” will appear on the TV.
6. Press OK to close the message. The Blu-ray Disc™
player is now connected to the network. From now on,
when you turn on the player, it will automatically connect
to the network; there is no need to repeat these steps
again.
Notes:
If you do not see this message, the Blu-ray Disc™ player •
was not able to connect to the network.
If th e w irele ss netw ork is • encrypte d using a n
unsupported encryption (it appears in the network
list with an icon), you cannot connect to the network.
You must change the router’s encr yption type before
proceeding.
3. Press the WPS button on the top of your router.
4. Once you see “Success” on the button at the bottom of
the screen, the Blu-ray Disc™ player is connected to
the router.
Note: If you do not see this message, the Blu-ray Disc™
player was not able to connect to the network. Repeat
steps 1-4 again.
b. If the Blu- ray D isc™ player is conn ected to a
Wireless Network Using WPS PIN:
2. Press / to select Network List, then press OK. A
list of existing wireless networks near the Blu-ray Disc™
player will appear (It may take several seconds for this
list to be created).
3. Press / to select the desired wireless network, and
press OK to confi rm.
4. Press / to highlight WPS PIN, and press OK. The
following screen will appear:
5. Press / to highlight connection method you desire,
and press OK.
6. Follow the on-screen message to continue operating
the connection.
1
Done
2 3 4 5 6 7 8 9 0q w e r t y u iopa s d f g h j k l ;z
Space
xcv`- = \[ ] 'b n m , . /
Manual
WiFi Protected Setup (WPS)
IP Settings
Network List
Wireless
Customizing the Function Settings
b. If the Blu-ray Disc™ player is co nnected to a n
Encrypted Wireless Network, a menu similar to the
following will appear:
3. Press OK(ENTER) to activate the on-screen keyboard.
Carefully enter the network password by using the /
/ / to highlight the desired letter on the keyboard,
and then pressing OK. (If you make a mistake, use the
backspace key to erase the mistake.)
4. Use / / / to highlight
Done
on the upper-right
corner of the keyboard, and press OK to remove the
keyboard from the screen.
Password
WiFi-me
Press ENTER to open keyboard
Connect WPS Pin Cancel
Password is case-sensitive