Toshiba BDX3300 owner manual Customizing, General Setting

6 Customizing

This section describes the various setting option of this Blu-ray DiscTM player.

If the setup option is greyed out, it means the setting cannot be changed at the current state.

General Setting

1.Press SETUP button on the remote control. The Setup Menu appears.

General Setting

System	Screen Saver	On
Language	Disc Auto Playback	On
Playback	CEC	On
Security	Load Default	More...
Network	Upgrade	More...

Move cursor key to select menu option	SETUP	Exit
then use “OK” key to select

2. Press  to select an option, then press

to access.

3. Press / to select a setup option and press .

4. Select the setting you wish to change

and press OK to confirm.

-Press  to return to the previous menu.

[System]

To change the following system option to personalize your Blu-ray DiscTM player.

•[Screen Saver]

Turn On or Off the screen saver mode. It helps to protect the TV screen.

{ On } – Set the screen saver active after approximately 5 minutes with no operation. You can turn off the screen saver by pressing the SETUP button.

-The Blu-ray DiscTM player will switch to standby mode if there is no operation after the screen saver is engaged for approximately 10 minutes.

{ Off } – Turn off the screen saver mode. The Blu-ray DiscTM player will not switch to standby mode automatically.

•[Disc Auto Playback]

Turn On or Off the disc automatic playback switching mode.

{On} – The disc playback automatically after loading.

{Off} – Turn off disc auto playback mode.

•[CEC]

This player supports REGZA-LINK which uses the HDMI CEC (Consumer

Electronics Control) protocol. You can use one single remote control to control all REGZA-LINK-compliant devices that are connected through HDMI connectors.

{On} - Turns on REGZA-LINK features. -With CEC on, during TV standby with the Blu-ray DiscTM player on, pressing SETUP, PLAY/PAUSE will power on the TV. When you turn the TV off, this unit will automatically turn off.

{Off} - Disables REGZA-LINK features.

•[Load Default]

Reset all settings of Blu-ray DiscTM player to initial default state.

- Follow the instruction on the TV screen to confirm the default setting operation.

1. Select Load Default.

2. A dialogue box pops up shown as below. Select OK.

Load Default

Do you want to load default?

Cancel

3.It may take awhile when loading default is in progress. Please wait...

Load Default

Loading default, please wait...

30%

4. TV will display as follow:

Welcome

to the Toshiba Blu-ray Disc Player Setting Wizard.

Some simple settings are suggested before you begin. You can also access detailed settings from the Setup Menu.

OK Next

5. Press OK, enter language setting. Press/ to select a language option.

Choose	English
an OSD language before starting.
The language selected will be applied not only
here but also in other OSD windows, menus
etc.
Previous	OK Next

6. Press OK, enter Resolution setting.

Choose	Auto
a resolution that fits your TV.	480i/576i
Change will be applied immediately, you have	480p/576p
15s to determine whether to save the setting	720p
or rollback to prior resolution. Better
performance will be provided by an HDMI	1080i
connection!
	1080p
Previous	OK Next

English

15