English
Press /to select an option. Press OK. Select "Yes" or "No" using /.
Resolution | 14s |
|
|
has been changed! | Yes |
| |
|
| ||
|
|
| |
Does everything looks all right with this |
| No |
|
resolution? Press Yes if you want to apply it. |
| ||
|
| ||
Press No to rollback to previous one. |
|
|
|
|
|
|
|
Previous |
| OK | Next |
|
|
|
|
7. Press OK, enter Aspect ratio setting.
Choose | 16:9 Full | |
an aspect ratio that fits your TV. | 16:9 Normal | |
| ||
The change will be applied in the next page. | 4:3 Pan&Scan | |
Determine whether to save the setting or | 4:3 Letterbox | |
rollback to the previous aspect ratio. | ||
|
|
|
Previous | OK | Next |
Press / to select an option. Press OK.
Setting
wizard is complete!
Now press the OK button to finish and return to the Setup Menu.
Previous | OK Finish |
8. Press OK to return to [General Setting] Menu.
•[Upgrade]
For software upgrades to enhance performance, you could select the following upgrade method and start to upgrade.
{Disc}/{USB Storage}/{Internet}
SW upgrade by Disc/USB Storage
Upgrade the software from the disc or USB flash drive.
1.Insert the disc or connect the USB flash drive which contains the upgrade file package.
2.Follow the instruction on the TV
screen to confirm upgrade operation.
-The system will reboot after 5 seconds or
OK key is pressed.
Notes:
-If set [Disc Auto Playback] to [Off], after you insert the disc that contains the upgraded information to upgrade system, you have to start upgrade from this option of SETUP Menu.
-If the upgrade file package did not pass the verification, error prompt is displayed , check the package again (such as the package is not complete).
-Make sure the firmware version is not an old version.
-When you upgrade the system using USB flash drive, you should make a new folder named UPG_ALL, and copy the upgrade file into this
folder.
SW upgrade by Internet introduction There are two modes to upgrade via internet: Automatic Mode and Interactive Mode.
Automatic Mode:
The player will check the Internet whether it is connected automatically when powered on.
If connected, player will try to connect the
Toshiba server to check if there is new firmware for the player.
If yes, the player will pop up a message on the screen to inform you that an upgrading firmware is available on the internet. You can choose whether to upgrade or not.
Upgrade
New software found! Upgrade?
Cancel | OK Start |
Interactive Mode:
You can also do Internet upgrade via setup menu.
You should make sure that the player is connected to the internet first.
Press SETUP button of the remote control, then choose "System
Upgrade
Connecting to the server. Please wait!
If yes, the player will pop up a message on the screen and you can choose whether to upgrade or not.
Upgrade
New software found! Upgrade?
Cancel |
| Start |
OK |
If no, the player will pop up a message on the screen to inform you that there is no new firmware for the player.
Upgrade
Current version is latest. Update is not available.
Cancel
16
