menu.
- Press SETUP to exit the menu.
[TV]
•[TV Screen]
Select the screen format according to how you want the picture to appear on the TV.
{16:9 Full} – For a disc with the aspect ratio of 4:3, the output video is stretched into 16:9 full screen.
{16:9 Normal} – For a disc with the aspect ratio of 4:3, the output video is resized vertically to match what will be seen on the display.
{4:3 Pan&Scan} – For standard TV, it displays a wide picture on the entire screen and cuts off the redundant portions.
{4:3 Letterbox} – For standard TV, it displays a wide picture with two black borders on the top and bottom of 4:3 screen.
•[Resolution]
Select a video output resolution that is compatible with your TV display capability.
{Auto} – Select the most suitable resolution according to the TV. {480i/576i}, {480p/576p}, {720p},
{1080i}, {1080p}
– Select a video resolution setting that is best supported by the TV. See TV manual for details.
•[Color Space]
Select a predefined Colour space of picture.
{RGB} – Select RGB Colour space.
{YCbCr} – Select YCbCr Colour space. {YCbCr422} – Select YCbCr422 Colour space.
{Full RGB} – Select Full RGB Colour space.
•[HDMI Deep Color]
This feature is available only when the display device is connected by a HDMI cable, and when it supports Deep
Colour feature.
{30 bits} – Output 30 bits Colour. {36 bits} – Output 36 bits Colour. {Off} – Output standard 24 bits Colour.
Note:
-When the colour space is "YCbCr422", even if HDMI Deep Color is set to 30bits/36bits, it is not output with Deep Colour.
•[HDMI 1080/24p]
{On} – Enable 1080/24p video
resolution setting.
{Off} – Disable 1080/24p video resolution setting.
Notes about HDMI 1080/24p:
If you want the 1080/24p output, it should fulfill below 3 conditions:
1.TV supports the 1080/24p display;
2.Player choose the 1080/24p option in the setup menu;
3.Media must be the 1080/24p video.
Notes:
-This resolution becomes effective only when the playing
-During HDMI 1080/24p playback, there will
be no composite output.
[Video Process]
Display Setting
TV | Video Adjust | More... |
Video Process | Sharpness | Low |
Move cursor key to select menu option | SETUP | Exit | |
then use “OK ” key to select | |||
|
|
•[Video Adjust]
Select a predefined setting of the video.
1.Press OK.
2.Press/ to adjust the video
Brightness, Contrast, Hue and
Saturation.
{Brightness} - Press t/ to adjust the brightness of display, goes left means dark and right means bright. {Contrast} - Press t/ to adjust the contrast of display, goes left means low contrast and right means high contrast. {Hue} - Press t/ to adjust the Hue of display, goes left means low hue and right means high hue.
{Saturation} - Press t/ to adjust the saturation of display, goes left means low Saturation and right means high saturation.
3.Press RETURN to exit.
| Brightness |
|
| |
|
|
| ||
|
|
| ||
| Contrast |
|
| |
|
|
| ||
| Hue |
|
| |
|
|
| ||
| Saturation |
|
| |
|
|
| ||
| Change | RETURN Exit | ||
|
|
|
|
|
|
|
|
|
|
•[Sharpness]
Select the level of sharpness: High, Middle, Low.
{High} - Select High sharpness level. {Middle} - Select Middle sharpness.
English
21
