Troubleshooting
Before calling a service technician, please check the following table for a possible cause of the problem and some solutions.
Problem | Solution | |
TV will not turn on | • | Make sure the power cord is plugged in, then press POWER. |
| • | The remote control batteries may be dead. Replace the batteries. |
No picture, no sound | • | Check the antenna/cable connections. |
No sound, picture OK | • | The sound may be muted. Press VOLUME. |
| • | The station may have broadcast difficulties. Try another channel. |
| • | Check that the SPEAKERS function in AUDIO menu is properly set. |
Poor sound, picture OK | • | The station may have broadcast difficulties. Try another channel. |
Poor picture, sound OK | • | Check the antenna connections. |
| • | The station may have broadcast difficulties. Try another channel. |
| • | Adjust the PICTURE menu. |
Poor reception of broadcast channels | • | The station may have broadcast difficulties. Try another channel. |
| • | Check the antenna connections. |
| • | If you are using a VCR, make sure the TV/VCR button is set |
|
| correctly. |
Cannot receive above channel 13 | • | Make sure TV/CABLE is set to TV mode. |
Black box appears on the screen | • | Captioning may be turned on. |
Unable to select a certain channel | • | The channel may be locked out with the BLOCK CHANNEL |
|
| feature, or erased with the ADD/ERASE feature. |
Multiple images | • | The station may have broadcast difficulties. Try another channel. |
| • | Use a highly directional outdoor antenna. |
Poor color or no color | • | The station may have broadcast difficulties. Try another channel. |
| • | Adjust the TINT and/or COLOR in the PICTURE menu. |
| • | If you change the direction of the TV while the TV is activated, the |
|
| picture may suffer from color shading. If so, turn off the TV and |
|
| allow it to cool for about 30 minutes, then turn on the TV again. |
|
| The picture should improve. |
No stereo or SAP sound from a | • | Make sure the MTS feature is set properly. |
known MTS broadcast |
|
|
The remote control does not operate | • | Check if the TV/CABLE/VCR/AUX switch is properly set. |
| • | There may be an obstruction between the remote control and the |
|
| remote control sensor. |
| • | The remote control batteries may be dead. Replace the batteries. |
Introduction
Connecting your TV
Using the Remote Control
Setting up your TV
Using the TV’s Features
Appendix
Index
43