Toshiba CS3330BLI, CS3330BI specifications On/Off

Phase difference:	The phase difference between the trailing edge
	of VD and the trailing edge of HD must be as
	shown below.
		1st field	2nd field
	VD

HD

	t1＝0+/-5 micro sec			t2=1/fH/2 +/-5 micro sec
Output signal:	HD,VD negative polarity
Level:	3.5 to 4.5V(p-p) / 1k ohm terminated
	8.0 to 9.0V(p-p) / high
Pulse width:	HD:	6.36±0.5 micro sec
	VD:	572±5 micro sec
Repeat frequency:	fH =15.73426 kHz
	fv =2 fH/525
Scanning lines:	525 lines
Output circuit:
				+9V	1k ohm
	HD
	VD
			TD62504F
Electronic line display or reticle (CS3330BLi ONLY)
NO. of lines:	2 horizontal lines, 2 vertical lines
Movable range:	Entire monitor screen
Line width:	Horizontal line:		1 scanning line/field
	Vertical line:		approx. 0.5 micro sec
Polarity :	White(POSI) / black(NEGA) selectable
ON/OFF:	switching
Electronic line / reticle:	Internal selector switch
	(Factory preset is electronic line.)
Gamma:	0.45/1 selectable
AGC:	ON/OFF switching
	3

This specification subjects to change without notice.

D4134992A