Toshiba CS3330BI, CS3330BLI specifications Specification

4. SPECIFICATION

4-1 Mechanical specifications

Overall dimensions and weight
Camera head:	Refer to the attached camera head diagram.
Camera control Unit:	220(w) x 60(H) x 240(D) mm (excluding rubber casters)
	Mass : approx. 2.6 kg
Camera cable:	6.3mm(dia.) x 3 m length
Lens mount:	C mount

4-2 Electrical specifications
TV system:
	Based on EIA standard
Pickup Device:	Interline transfer CCD ICX422AL
Effective pixels:	768(H) x 494(V) pixels
Unit cell size:	11.6(H) x 13.5(V) micro m
Sensing area:	8.8(H) x 6.6(V) mm
	(Equivalent to type-2/3 normal optical image
	size respectively.)
Scanning method:	525 lines, 2:1 interlace
Sync. system:	automatic switching between
	internal / external synchronization
Scanning frequency:	horizontal;		15.734kHz
	Vertical;		59.94Hz
Aspect rate:	4:3
Subject illumination:
Standard:	100 lx, F4(3100K),(AGC OFF, gamma=1.0)
Minimum:	0.3 lx, F1.4,(gamma=0.45 with maximum gain)
Video output:	VS: 1.0V(p-p)/ 75 ohm
Horizontal resolution:	570 TV lines
Vertical resolution:	350 TV lines
S/N:	56dB (AGC OFF, gamma=1.0 )
External sync input:
Input level:	2 to 6 V(p-p) for both HD and VD signals
Input impedance:	1 k ohm for both HD and VD signals
Method:	2:1 interlace
Polarity:	Negative
Pulse width:	HD:	6.4 +/- 3 micro sec
	VD:	150 to 800 micro sec
Repeat frequency:	fH =15.734 kHz±2%
	fv =2 fH/525
Scanning lines:	525 lines

2

This specification subjects to change without notice.

D4134992A