Toshiba CSGU15CC18, CSGX36CC3 Notes on Conformity of the EMC, Machine externals specification

(5)	Conformity cable	Twist pair (Category 5e or over)
(6)	Cable length	To 100m (at the Unshielded Twist Pair (UTP) cable using)
(7)	Recommended cable	Oki Electric Cable Co., Ltd
		HONDA TSUSHIN KOGYO CO., LTD
		High bending resistance shielded Cat5e LAN cable
		* Because above recommendation cable is high bending
		resistance, maximum length of cable is 40m.
		* Contact your dealer / distributor for details
		of recommended cable.
[Machine externals specification]
(1)	Dimensions	44mm(W) x 29mm(H) x 70mm(D) (Not including protrusion)
(2)	Mass	Approximately 120g
(3)	Lens mount	C-mount
(4) Flange back		it is not possible to adjust it: 17.526mm
(5)	Camera body grounding: insulation status
		Conductive between circuit GND and camera body.
[Operating ambient conditions]
(1) Ambient conditions
- Performance assurance		Temperature:	0 to +40° C,	Humidity: 10 to 90% (no condensation)
- Operating assurance		Temperature:	-5 to +45° C,	Humidity: 90% or less (no condensation)
- Storage assurance		Temperature: -20 to +60° C,		Humidity: 90% or less (no condensation)

(2)EMC conditions (Electro-Magnetic Compatibility)

-EMI (Electro-Magnetic interference)

EN61000-6-4 conformity

FCC part15 Subpart B class A conformity

-EMS(Electro-Magnetic susceptibility) EN61000-6-2 conformity

Notes on Conformity of the EMC:

About the conformity of the EMC standard of this machine, it has guaranteed in the conditions combined with the option part of 4th clause.

When used combining parts other than specification of our company, I ask you to have final EMC conformity checked of a visitor with a machine and the whole equipment.

(9/16) D4153497A