7. Timing chart
Image data outputs of this camera series are transferred with the UDP protocol of Gigabit Ethernet. Timing numerical value below is prescribed by absolute prerequisite that GiantDragon series use transmission band without restriction of other node. When there is a node transferring with GiantDragon concerned, it is not same the numerical value prescribed below.
(1)In the normal shutter mode
Video format: RGB 24 bit, all pixel readout
Expose |
|
|
|
|
GbE bus | Image |
| Image | Image |
| T1 | TDLY1 | T2 |
|
|
|
| TDLY2 |
|
T2
Model name | T1 [ms] | T2 [ms] | Frame rate [ms] |
CSGV90CC3 | 0.5 | 7.7 | 11.1 |
CSGX36CC3 | 0.5 | 19.3 | 27.8 |
CSGS20CC2 | 1.0 | 30.0 | 50.0 |
CSGU15CC18 | 1.0 | 46.8 | 66.7 |
*T1 is the maximum value, and T2 (GVSP_FRAME_RATE) is the minimum value.
*Frame rate is maximum speed.
*At the setting the GVSP_SIZE (SCPSx) = 1500 byte / packet.
(T2 is changed by GVSP_SIZE (SCPSx).)
*Set the value that TDLY1 (GVSP_BLOOK_START_DELAY) to satisfy the next numerical formula; T1 + TDLY1 + T2 >= Frame rate
(13/16) | D4153497A |
|
