HP 2100 ER manual Choosing a Location, Physical Specifications, Environmental Specifications

Table 1-3

Table 1-4

NOTE

Introduction

Choosing a Location

Choosing a Location

Physical Specifications

The Fibre Bridge is designed for rackmounting. The unit can be mounted in most standard 19-inch rack configurations. The physical characteristics are as follows:

Physical Specifications of the Fibre Bridge

Height	1.7 inches (4.2 cm)
Width	16.9 inches (42.9 cm)
Depth	9 inches (22.8 cm)
Physical package	Approximately 8 pounds (3.6 kg)
weight

Environmental Specifications

Choose a location that meets the following criteria:

Location Criteria

Room temperature	40–104° F (5–40° C).
Humidity	5% to 80% relative humidity, non-condensing.
Power source	AC power voltage: 100/120V to 220/240 V.
Clearance	Rackmount configuration—requires 1 EIA
	unit in a rack. 1 EIA = 1.75 inches (44 mm).
	Requires 5 inches (125 mm) clearance between
	the rear edge of the Fibre Bridge and the
	backplane of the rack, to allow adequate room
	for cables.

See Chapter 2 for rackmounting instructions.

1-6 Chapter 1