Toshiba D-VR17KB If the Timer Programming did not Complete Correctly, Error numbers indicate

E9GA0BD_EN.book Page 35 Monday, March 26, 2007 10:25 AM

If the Timer Programming did not Complete Correctly

The error number appears on the Timer Programming list.

Timer Programming

0:00 THU 06/12

	Date	Start	End	CH	PDC
E40	06/12	7:00	9:00	P11
		New Program

1/1

The error programme will be displayed in grey with an error number.

The error numbers indicate:

E1–E22,

E37–E39: Recording error

E23–E24: Unrecordable disc

E25 : • Copy prohibited programme

• Cannot record because of the NTSC /

	PAL-60 signal is received.
E26–E28: Copy prohibited programme
E29	: Disc protected
E30	: Disc full
E31	: Already recorded 99 titles (Video
	mode)
E32	: Already recorded 99 titles (VR mode)
E33	: Already recorded 999 chapters
E34	: No space for Control Information
E35	: PCA (Power Calibration Area) full
E36	: Already finalised Video format disc
E40	: • There are some unrecorded parts due
	the overlapped timer programmes.
	• Recording did not start at the start
	time.
	• There is no tape in the cassette
	compartment.
	• Tape recording reaches to the tape
	end during timer recording.
E41	: Power failure
E42	: No disc
E43	: Already 49 titles recorded (+VR mode)
E44	: Already 254 chapters recorded (+VR mode)
E45	: Copy prohibited programme
E46	: It is impossible to record additionally on
	a disc recorded by other units when

setting “Make Recording Compatible” to “OFF”. (+VR mode)

The error programme will be deleted once you check the error in the programme list, or once you cancel the timer-standby mode and re-enter it.

Hints for the Timer Recording

•If there is a power failure or the unit is unplugged for more than 30 seconds, the clock setting and all timer settings will be lost.

•If there is no disc or an unrecordable disc in the tray (finalised DVD-RW/-R, finalised DVD+R, a fully recorded disc, etc.), the DVD on the front panel display will flash and the timer recording will not occur. Insert a recordable disc.

•If there is no tape or a tape with a record tab is not in the cassette compartment, the VCR on the front panel display will flash and the timer recording cannot be performed. Please insert a recordable tape.

•When all timer recordings are complete, the icon flashes. To play back or eject the recorded disc, press [TIMER SET], and then press [PLAY P] or [OPEN / CLOSE O].

•The timer recording cannot be performed in DVD and VCR at the same time. If you set two programmings with the same channel and time both in DVD and VCR, the programming that has priority will be recorded.

•You cannot make any DVD operation during DVD timer recording.

•You cannot make any VCR operation during VCR timer recording.

•If the Start and End times are same, the length of the recording will be set for 24 hours. If the disc or tape becomes full during recording, the unit will turn itself off. To continue recording, press [TIMER SET] to cancel the timer-standby mode, insert a recordable disc or tape and press [TIMER SET] again.

•When 2 or more programmes are overlapped, “Timer program overlapped” appears, and the overlapped programme will be displayed in blue. To correct the timer programme refer to “Checking, Cancelling or Correcting the Timer Programming Information” on page 34.

•If the Start time is earlier and the End time is later than the current time, the recording will start immediately after you press [TIMER SET].

•If a videotape ends during the timer recording, the unit will automatically stop, eject the videotape, and turn itself off. To continue recording, insert a recordable tape.

Priority of overlapped settings

The unit records programmes according to priority if the timer programmes overlap.

If the starting time is same:

•The timer programming set first (PROG. 1) has priority.

				PROG. 2
PROG. 1
				recording
PROG. 2				will start
				after
				PROG. 1
Actual				recording is
recording	PROG. 1	PROG. 2	completed.

The first 2 minutes (at the longest) will be cut off.

When the starting time and the ending time for each programmes are different:

• A programme that has earlier start time has priority.

PROG. 1
PROG. 2
PROG. 3
Actual	PROG. 1	PROG. 3 PROG. 2
recording

The first 2 minutes (at the longest) will be cut off.

EN 35

Introduction Connections Basic Setup Recording Playback

Editing Function Setup VCR Functions Others