Toshiba DKT2001 manual Call Waiting, For Calls On Hold Dialing Description

Advanced Operation

Call Waiting

Table 3	Call Pickup Feature Codes (continued)
For Calls On Hold:		Dialing	Description
Local Retrieve			Picks up a call held on the telephone from which it is dialed.
Remote Retrieve		+ Primary	Retrieves a call held on the telephone specified extension
		Ext. No.	number.
		+ Outside	Picks up a call held on the specified CO line regardless of the
Outside Line Retrieve			telephone placing the call on hold. Must enter three digits
		Line No. (1~128)
			(e.g., 007).
Directed Extension		￿￿￿￿￿+ Ext. No.	Picks up a call held on the specified extension number,
Retrieve			regardless of the instrument(s) on which it appears.

Notes

1.The Primary extension number is the directory number by which the phone set is defined. Other, non-primary extension numbers may also appear on the phone. By convention, the Primary extension number is assigned to the first button on a multi-button telephone.

2.If more than one call is on hold, the call on the telephone’s lowest button number is picked up.

3.Ringing calls are picked up over held calls as a priority.

Call Waiting

You can answer a call that is transferred to your station, even when your station is busy. When another call is camped onto your station, you hear two Camp-on tone beeps and the extension or Line LED flashes red (on-hold).

If a call is sent to your station when busy, and your station does not have an extension button available to receive the call, two camp-on tone beeps are sent to your telephone. You must disconnect or transfer the existing call to answer the waiting call.

➤To answer a waiting call by disconnecting or transferring the current call

➤Hang up or transfer the existing call; the camped-on call rings your station. The camped-on line rings your telephone. For DKT3001 phones, the Line LED flashes (incoming call).

26 Strata CTX DKT3001/2001 Digital Single Line Telephone 01/02