![](/images/new-backgrounds/1326143/32614353x1.webp)
Installation
Connect and Apply Power
Step 5: Connect and Apply Power
Base Unit
1.Plug the AC adapter cord into the AC adapter input jack on the Base Unit (shown at right).
2.Plug the AC adapter into a standard 120VAC wall outlet.
3.Check to see that the power LED is on.
4381
AC Adapter
Charger Unit
1. | Plug the AC adapter cord into the |
|
|
|
| input jack on the Charger Unit |
|
|
|
| (shown at right). |
|
|
|
2. | Plug the AC adapter into a standard |
|
|
|
| 120VAC wall outlet. |
|
|
|
|
|
|
| |
|
|
|
| |
3. | Check to see that the power LED is | 4552 |
|
on.
Important!
●If the power does not light on either the Charger or Base Units, return everything to your Authorized Dealer.
●Always route the power cord where it is not a trip hazard, and where it cannot become chafed and create a fire or electrical hazard.
Strata | 15 |