Toshiba e-STUDIO45, e-STUDIO28, e-STUDIO35 manual Printer List, Printer Status

TOSHIBA e-STUDIO28/35/45 Unix Printer Driver

system requires the scripts to be in a different location, specify the new location in this field.

•Middle script/Client script

o This is for Linux installations only: This is the name to give the actual script installed on the system. By default, this is shfilter-ps.tosfor server install type, and is shfilter.clnt for client install type.

o For server installation type, the label is Middle script.

o For client installation type, the label changes to Client script.

•CORE Manpage Path

o This specifies the system directory where the CORE filter manpage will be installed. This is disabled if the Install Manpage field is not checked in the General tab.

•UI Manpage Path

o This specifies the system directory where the rcutil manpage will be installed. This is disabled if the Install Manpage field is not checked in the General tab.

•UI Link Path

o The setup program also installs a symbolic link to the rcutil configuration program in the location specified in the UI Link Path field. This is /opt by default.

•Temporary files path

o The setup installation program creates temporary files during installation. If /tmp is unavailable in the system, this field specifies an alternative location where temporary files can be created. This is /tmp by default. If you like the installation program to install the symbolic link in a different path, say /bin or /usr/bin, you can specify this new value in the Temporary files path field.

•Pass Thru (reserved)

o This is only for AIX systems without support for the rembak system utility:

•If the bullet is selected, the user can type in a name on the text field. It will be used as the pass thru name.

•If the bullet is not selected, the setup installation program will generate

(detect) a pass thru name. NOTE:

•The pass-thru queues are required for sending filtered jobs from the print queue to the Fiery ports (print, direct, or hold).

•This is only included as a fallback solution in AIX systems, which currently does not provide easy access to Fiery ports. If the current solution of using the rembak utility fails, pass-thru queues will be created.

Printer List

•Print Queue column

o This enumerates the print queues installed in the system and that are associated to the GA-1040 Print Driver.

•Destination column

o This shows to which network server with Fiery printer port the print queue will send jobs to.

•UI Link column

o This shows the path where the symbolic link to the rcutil configuration program associated to the print queue can be found.

Printer Status

This displays the status of the currently selected print queue in the Printer list.

User’s Guide 13