Toshiba B-210 SERIES, EM1-33043A, EM1-33043D

8- 2

EM1-33043D

8. CARE/HANDLING OF

THE MEDIA

•The thermal paper used for direct thermal

printing must not have the specifications

which exceed Ca++ 800 ppm, Na+ 800

ppm, K+ 800 ppm and CL- 600 ppm.

•Some ink used on pre-printed labels

may contain components which shorten

the print head's product life. Do not use

labels pre-printed with ink which contains

hard substances such as carbonic

calcium (CaCO3) and kaolin (Al2O3,

2SiO2, 2H2O).

For further information please contact your

local distributor or your media manufacturer.

8. CARE/HANDLING OF THE MEDIA

Contents

Main DECLARATION OF CONFORMITY TABLE OF CONTENTS TOC 2 TOC 1 1. INTRODUCTION Page Page Page Page Page Page Page Page 1- 10 1. INTRODUCTION 1.1 APPLICABLE MODEL B-210 Series Model name description B - 2 1 1 - G H 1 1 - G B NOTE: The B-211-GH11-GB model is for exclusive use in Great Britain. Page 2- 1 2. SPECIFICATIONS : Available only on the GH23 model. 2.1 PRINTER 2.2 SERIAL INTERFACE (RS-232C) 2.3 RADIO INTERFACE NOTE: The RS-232C interface cable must be disconnected when using the radio communication. 2- 3 2.4 IrDA INTERFACE The following specification is applicable only to the GH24 model. 2.5 MEDIA 2- 5 NOTE:Do not use media other than the above to ensure print quality and print head life. 3. APPEARANCE 3.1 FRONT/REAR VIEW 3- 2 3. APPEARANCE 3.2 OPERATION PANEL REPRINT STATUS 4. INSTALLING THE PRINTER 4.1 LOADING THE BATTERY Page 4.2 INSTALLING THE MEDIA GUIDE Page 5. LOADING THE MEDIA Page Page Page Page Page 7. ISSUING THE MEDIA NOTE:Trim off the backing paper coming from the backing paper outlet. Page 8. CARE/HANDLING OF THE MEDIA Page 9. GENERAL MAINTENANCE 9.1 CLEANING WARNING! Care should be taken not to injure your hand with the cutter when cleaning. Page 9.2 COVERS AND OPERATION PANEL 9.3 REMOVING JAMMED MEDIA 10- 1 10. TROUBLESHOOTING 10.TROUBLESHOOTING 10- 2 10. TROUBLESHOOTING