![](/images/new-backgrounds/1119986/11998633x1.webp)
3. OVERVIEW
3.3 SWITCHES AND INDICATOR LIGHTS
3.3 SWITCHES AND INDICATOR LIGHTS
• INDICATORS
PWR. (Power) Indicator
The green PWR. indicator light will illuminate when the Power Switch is turned on.
On-line Indicator
The green
ERR. (Error/Paper Empty) Indicator
The red ERR indicator light will illuminate at a printer error, such as memory error, command format error, and so on. For a full list of error messages, consult Section 15. TROUBLESHOOTING. The ERR. light flashes when the paper/ribbon has been used up.
•SWITCHES Pause Switch
The Pause switch allows the user to stop a print job and then continue printing with a second depression of the switch. By pressing the Pause switch: (1) the printer will stop printing after the label being printed is complete, (2) the Pause light will flash, and (3) the printer will hold all data in memory. This allows for
If the Pause switch is held pressed for longer than 3 seconds, the printer will be reset and all stored data of last printing job will be deleted.
Feed Switch
Pressing the Feed switch will cause the label paper to advance to the first print position of the next label.
Thermal Transfer/Direct Thermal Printing Switch
Switch 7 on the dipswitch located on the rear of the printer allows the user to switch between thermal transfer and direct thermal printing. For thermal transfer printing, set the switch to off. For direct thermal printing, set the switch to on.
Black Mark /Gap Sensing Switch
Switch 8 on the dipswitch located on the rear of the printer allows the user to select either black mark or gap sensing. For black mark sensing, set the switch to off. For gap sensing, set the switch to on.