6. LOADING LABEL AND TAG STOCK

EM1-33046A

6. LOADING LABEL AND TAG STOCK

6. LOADING LABEL AND TAG STOCK

1.Open the printer cover by pressing the two cover release buttons located on the right and left sides of the printer. While pressing the buttons, pull up on the printer cover.

2.Insert the label supply roll spindle into the core of a label roll.

3.Open the printer carriage by pulling up the release lever on the forward left side of the front rubber roller.

4.Place the label stock into the printer cover so that the labels feed from the top of the roll. If printing on tag stock, place the tag stock into the printer so that the tags feed from the bottom of the roll.

5.Place the label roll into the spindle mounts so that the label roll is positioned at the center of the spindle. Feed the tip of the label supply roll into the paper feed slot and over the front roller.

6.Adjust the label edge guides so that they just touch the edge of the label media.

CAUTION: The media must be passed from the media roll to the front rubber roller straight. Failure to do this may result in a media skew.

(Correct)

(Incorrect)

 

Media Roll

 

Label Edge Guide

 

Front Rubber Roller

Fig. 6-1

Self-peeling Roller

7. Press down the printer carriage until it hooks the front rubber roller.

CAUTION: Both sides of the printer carriage must be hooked completely, otherwise blurred print or media skew may be caused.

8.Wind the label roll to take up any excess slack.

9.Close the top cover and press the Feed switch three or four times until the green On-line indicator is illuminated.

NOTE: Make sure that both sides of the top cover are completely hooked.

10.When a roll of labels or tags run out, the On-line indicator light will not illuminate. Meanwhile, ERR. indicator will flash. Do not turn off the power to reload. Following the above steps, load a new roll of label stock and press the Feed switch three or four times until the On-line indicator light illuminates. Printing will resume without data loss.

6-1

Page 19 Page 21
Page 20
Image 20
Toshiba EM1-33046AE, B-442-QP owner manual Loading Label and TAG Stock
Page 19 Page 21

B-442-QP, B-442, EM1-33046AE, EM1-33046A specifications

The Toshiba EM1-33046A and EM1-33046AE are advanced semiconductor devices primarily designed for high-performance applications. These models are part of Toshiba's broader portfolio, which emphasizes cutting-edge technology and reliability. The EM1-33046A offers impressive operational capabilities and is well-regarded for its low power consumption, making it ideal for energy-sensitive applications.

One of the distinguishing features of the EM1-33046A and its variant, the EM1-33046AE, is their robust operational range. They are engineered to handle varying voltage levels efficiently while maintaining performance stability. This adaptability is crucial in fields such as automotive electronics, industrial automation, and consumer electronics, where devices must operate under diverse conditions. Furthermore, these components are built with integrated protective mechanisms, enhancing their reliability and longevity.

Complementing these models are the B-442 and B-442-QP series. The B-442 is known for its exceptional power management capabilities. It features an advanced architecture that optimizes the distribution of power across multiple channels, ensuring that electronic systems run smoothly and efficiently. The B-442-QP variant, on the other hand, introduces enhanced performance metrics, offering quicker response times and improved thermal management. This makes it perfect for applications that require rapid processing and minimal heat generation.

Both the B-442 and B-442-QP benefit from Toshiba's innovative power semiconductor technology. They utilize cutting-edge fabrication techniques, resulting in high-efficiency performance while minimizing energy waste. The devices are also designed with advanced thermal characteristics, allowing them to operate at higher temperatures without compromising functionality.

In summary, the Toshiba EM1-33046A, EM1-33046AE, B-442, and B-442-QP series are engineered for high performance and efficiency. Their unique combination of features makes them suitable for various applications, including automotive, industrial, and consumer electronics. These models not only showcase Toshiba's commitment to innovation but also their dedication to providing reliable, energy-efficient solutions for modern electronic systems. The integration of these technologies positions Toshiba as a leader in the semiconductor industry, meeting the evolving demands of a wide range of applications.
Top Page Image Contents