Toshiba B-SA4TM SERIES, EO1-33047 owner manual Batch mode

2. PRINTER SETUP

ENGLISH VERSION EO1-33047

2.3 Loading the Media

2.3Loading the Media (Cont.)

12.There are three issue modes available on this printer. How to set the media for each mode is provided below.

Batch mode

In the batch mode, the media is continuously printed and fed until the number of labels/tags specified in the issue command have been printed.

(1) Pull the top edge of the media past the Platen.

(2) Close the Top Cover until it clicks.

WARNING!

Be careful that your fingers, jewellery, clothing, etc., are not draw into the rollers of the Strip Unit.

Strip mode (Option)

When the optional Strip Module is fitted, a label is automatically removed from the backing paper at the Strip Plate as each label is printed.

(1)Open the Front Cover holding its right side.

Front Cover

Strip Unit

E2- 8