Toshiba EO1-33047, B-SA4TM SERIES owner manual Press down the Release Bar to open the Strip Unit

2. PRINTER SETUP

ENGLISH VERSION EO1-33047

2.3 Loading the Media

2.3Loading the Media (Cont.)

(2)Press down the Release Bar to open the Strip Unit.

Release Bar

Strip Unit

NOTE:

Be sure to close the Strip Unit completely. Failure to do this may cause a paper jam.

(3)Remove enough labels from the leading edge of the media to leave 300mm of backing paper free.

(4)Pass the backing paper through the opening under the Backing Paper Feed Roller. Then, close the Strip Unit until it clicks.

Backing Paper

Click

Backing Paper Feed Roller

(5)Insert the leading edge of the backing paper into the slot of the Front Cover.

(6)Close the Front Cover and the Top Cover.

Slot

Top Cover

Front Cover

E2- 9