106 GL-1010 Scan Operator’s Guide
ERROR MESSAGES
Error Messages Defined
Message Action (End User)
Scan kit
Internal Error
(SK1)
Restart the controller. If the controller is not
restored, contact the Network Administrator
Scan kit
Internal Error
(SK2)
Restart the controller. If the controller is not
restored, contact the Network Administrator.
Select either
Public or
Private scan.
Private scan
may require a
password.>Inte
rnal memory
used is NN%.
Confirm the job in process by reviewing the
Scan Jobs screen in TopAccess. When any
job is present, wait for the job to be
completed, or delete it. When the job is not
completed, delete it. If the error persists,
restart the controller. If the error still persists
after restarting the controller, contact the
Network Administrator.
Select either
Public or
Private scan.
Private scan
may require a
password. >
Shared
memory used
is NN%.
Delete unnecessary data from the controller
with TOSHIBA e-STUDIO GL TWAIN Driver,
or delete unnecessary FileShare data from
the controller.
Scan Kit
Internal Error
(SK3)
Restart the controller. If the controller is not
restored, contact the Network Administrator.
Scan Kit
Internal Error
(SK4)
Restart the controller. If the controller is not
restored, contact the Network Administrator.
DB access error.
Scan Kit
Internal Error
(SK5)
Restart both the controller and copier. If the
controller is not restored after restarting,
contact the Network Administrator.
GL-1010 Scan Operator's Guide.book Page 106 Friday, October 5, 2001 10:30 AM