GL-1010 Scan Operator’s Guide 79
Press the YES key. The Job is canceled. To stop the
cancellation, press the NO key.
nTo change the scan settings, press the SETTING key to change
the scanning settings in the Scanning Parameter Setting
screen. For further information, refer to Scan Setting on page 80.
3Press the FINISH key to finish scanning.
4When scanning is complete you will return to the Template
Selection List screen. The scanned image data is saved on the
controller HDD.
HANDLING PAPER
JAMS
In the event of a paper jam, the copier displays procedures on the
panel to assist with resolving the jam. When the jam is c leared,
Jam Recovery will display on the screen.
1Press the hard START button or SCAN! to continue ADF scan.
2Press the CANCEL JOB key or hard FC button to cancel a job.
3The screen will display Cancel Confirm.
nWhen using the ADF, if the job stops due to an error, such as
Job Overflow, during the continuous scanning of multiple
GL-1010 Scan Operator's Guide.book Page 79 Friday, October 5, 2001 10:30 AM