Chapter1Introduction

Preparation of the remote control

Set up the remote control to operate the player and your TV.

Loading batteries

1 Open the cover.

2 Insert batteries.

7Use 4 batteries (AAA sizes).

7Make sure to match the + and – on the batteries to the marks inside the battery compartment.

3 Close the cover.

Operating with the remote control

Point the remote control at the remote sensor and press the buttons.

Distance: About 7 m (23 ft) from the front of the remote sensor

Angle : About 30° in each direction of the front of the remote sensor

Notes

Do not drop or give the remote control a shock.

Do not leave the remote control near an extremely hot or humid place.

Do not spill water or put anything wet on the remote control.

Do not disassemble the remote control.

Dispose of batteries in a designated disposal area.

Batteries should always be disposed of with the environment in mind.

Always dispose of batteries in accordance with applicable laws and regulations.

If the remote control does not operate correctly, or if the operating range becomes reduced, replace all batteries with new ones.

When necessary to replace batteries in the remote control, always replace all batteries with new ones. Never mix battery types or use new and used batteries in combination.

Be sure to use AAA size batteries.

Always remove batteries from remote control if they are dead or if the remote control is not be used for an extended period of time. This will prevent battery acid from leaking into the battery compartment.

Caution

Never throw batteries into a fire.

About the remote control backlight

The remote control has a backlight function for conveniently illuminating the buttons when you use the remote control in a dark room, etc.

7Lights for approximately 10 seconds when a button is pressed.

7Lights for approximately 10 seconds when the remote control senses a certain amount of vibration (approximately 1 second for a small amount of vibration).

16

To turn off the backlight function

Press and hold

for at least

approximately three seconds.

To turn back on the backlight function, press and hold again for at least approximately three seconds.

Note

The backlight function is on by default. Using the backlight function shortens the lifespan of the batteries.

Page 17
Image 17
Toshiba HD-D1, HD-A1 owner manual Preparation of the remote control, Open the cover Insert batteries, Close the cover

HD-A1, HD-D1 specifications

The Toshiba HD-A1, introduced in March 2006, was a groundbreaking player in the high-definition era, marking Toshiba's entry into the next-generation DVD market. As the first HD DVD player available to consumers, it played a pivotal role in the format war between HD DVD and Blu-ray.

One of the standout features of the HD-A1 was its ability to deliver stunning 1080p video resolution. This high-definition output brought enhanced clarity and detail to films, significantly improving the viewing experience compared to standard DVDs. The player was equipped with an HDMI 1.1 output, which allowed for high-bandwidth digital content protection, ensuring that the video and audio quality remained uncompromised during transmission to compatible high-definition displays.

In terms of audio capabilities, the HD-A1 supported advanced audio formats like Dolby Digital Plus and DTS-HD, offering home theater enthusiasts a more immersive sound experience. The player also featured a built-in HDMI upscaling, enabling it to upscale standard DVDs to near HD quality, ensuring that consumers could enjoy their existing collections in a new light.

Additionally, the Toshiba HD-A1 included a range of connectivity options. It came with component video outputs, composite video outputs, and optical and coaxial digital audio outputs, catering to a variety of home entertainment setups. The player also had a USB port, although this feature was limited at launch and primarily intended for potential future enhancements through firmware updates.

The build quality of the HD-A1 was robust, featuring an attractive design with a sleek black finish and a user-friendly interface. The front panel had a simple layout, consisting of essential buttons and a bright LCD display that made navigation straightforward.

While the HD-A1 faced stiff competition from the Blu-ray disc format, it was well-received initially, appealing to early adopters of high-definition technology. However, as the format war progressed, the eventual defeat of HD DVD in 2008 led to the HD-A1 being overshadowed by Blu-ray players. Nonetheless, the Toshiba HD-A1 remains an important piece of technology history, representing a significant step forward in home entertainment and offering a window into the evolution of video formats.