(1)When the spring is released -
Perform the steps shown in Figures 13 and 14 in that order.
CHARGING
HANDLE
CLOSED
LEVER
Figure 13 Turn the handle clockwise 3 to 5 times and make sure that the spring status is taut.
Figure 14 Press the closed lever (green) in the direction of the arrow to close the circuit. When the switching status will change to ON, the VCB is set in close state.
(2)When the spring is taut -
Perform the step shown in Figure 15.
CLOSED
LEVER
Figure 15 Press the closed lever (green) in the direction of the arrow to close the circuit. When the switching status will change to ON, the VCB is set in close state.
- 17 -