| Move up and down |
| Select the desired |
|
|
| by pushing |
| value by pushing |
|
|
| MENU UP,DOWN |
| DATA UP,DOWN |
|
|
|
|
|
|
| OUTPUT Y/Pb/Pr, RGB |
| |||||
|
| ||||
| OUTPUT | RGB | RGB SYNC G, ALL ON, ALL OFF | ||
|
| ||||
| RGB SYNC | G | SHADING MANUAL Setting 128 to 127 | ||
| SHADING | OFF |
| ||
| BAUD RATE | 9600bps | RS232C baud rate 9600bps, 19200bps | ||
| OSD OUTPUT | ALL ON |
| ||
|
|
|
|
| OSD OUTPUT ALL ON, Analog, Digital |
|
|
|
|
|
|
䋨7䋮4䋩 Changing RGB SYNC
Move the “ ” to RGB SYNC by pushing [MENU UP], [MENU DOWN] buttons.
Select G, ALL ON or ALL OFF by pushing [DATA UP], [DATA DOWN] buttons.
* When Y/Pb/Pr is selected at OUTPUT, RGB SYNC change cannot be performed.
䋨7䋮5䋩 Changing RS232C baud rate
Move the “ ” to BAUD RATE by pushing [MENU UP], [MENU DOWN] buttons.
Select either 9600bps or 19200bps by pushing [DATA UP], [DATA DOWN] buttons.
䋨7䋮6䋩 Changing OSD OUTPUT mode
Move the"→" to OSD OUTPUT by pushing [MENU UP], [MENU DOWN] buttons. Select either ALL ON, Analog, or Digital by pushing [DATA UP], [DATA DOWN] buttons.
ALL ON can be performed in the both analog and digital monitor. If Analog is selected, it outputs only for analog.
If Digital is selected, it outputs only for digital.
Please select a mode depending on the type of the monitor display that is connected. If incorrect mode is selected, the display might be disappear.
In that case, please cycle the power, and refer to section “7.2 (8) Returning to factory settings”. Please return other settings again.
䋨8䋩 Returning to factory settings
The contents set of each scene file can be returned to the factory default status (preset status).
(1)Select a scene file to set to the factory default status by [FILE] button.
(2)If the color bar pattern or characters are displayed on the screen, press the [DISP] button to disable the color bar pattern and character display.
(3)Push [MENU DOWN] and [DATA DOWN] buttons simultaneously for approx. 1 second.
(4)The preset operation starts. When the preset operation finishes, the character PRESET OK is displayed for approx. 1 second.
30
