Toshiba IK-SX1L Picture-shooting area, DC in 12V terminal, Mode Select switch, Digital terminal

1Picture-shooting area

2DC IN 12V terminal

MODE SELECT

	3	MODE SELECT
DC IN 12V	GAIN	switch
	4	GAIN control volume
DIGITAL	5	DIGITAL terminal

[Front][Rear]

1Picture-shooting area

The protection cap is attached on the lens mount portion. After removing the cap, mount the lens. Be careful not to scratch or touch the optical area.

2DC IN 12V terminal

Accept a DC power input (12V).

3MODE SELECT switch

Selects the gain mode (OFF/ON).

Selects the synchronizing output signal (HD, VD/LEN, FEN). Selects the operation mode.

Selects the electric shutter exposure time. Selects the partial scanning mode.

4GAIN control volume

Adjusts the video signal gain when the gain mode is set to ON with the MODE SELECT switch 3.

5DIGITAL terminal

IK-SX1L: Outputs the EIA RS-644 LVDS 8-bit digital signal. Enters a trigger signal.

IK-SX1: Outputs the Camera Link signal (8-bit digital signal). Enters a trigger signal.

6