Manuals / Toshiba / Photography / Digital Camera

Toshiba IK-TF9C instruction manual Names and Functions

Models: IK-TF9C

1 32

Download 32 pages 19.94 Kb

Page 6

3. NAMES AND FUNCTIONS

1 Prism faceplate

8DC IN 12V terminal

2DISP button

4MENU UP button

		(AWB)
		DISP	6	DATA UP (AWB) button
		MENU DATA
		DC IN 12V	7	DATA DOWN button
		PAGE	7	DATA DOWN button
			5	MENU DOWN button
	3 PAGE button		9	DIGITAL terminal
[ Front ]		[ Rear ]
10	11	12

[ Bottom ]	[ Top ]
1 Prism faceplate	The protection cap is attached on the lens mount portion. After removing the cap,
	mount the lens. Be careful not to scratch or touch the optical area.
2 DISP button	Used when switching the display.
3 PAGE button	Used when switching to the menu and when selecting the menus.
4 MENU UP button	Select the function to be confirmed or changed on the menu.
5 MENU DOWN button	Select the function to be confirmed or changed on the menu.
6 DATA UP (AWB) button	Changes the value of the function selected by the MENU (UP/DOWN) button. (Also
	used when using AWB.)
7 DATA DOWN button	Changes the value of the function selected by the MENU (UP/DOWN) button.
8 DC IN 12V terminal	Accept a DC power input (12V).
9 RGB terminal	8-bit RGB, digital signal, and sync signal are output in the Camera Link format.
	Trigger signal is input.
	Mode switching signal for partial scanning is input.
	Accepts serial communication control signal.
! Mounting holes M3	Used to fix the camera.
" Mounting holes M2	Used to fix the camera.
# Mounting holes M3	Used to fix the camera.

6

Image 6

Toshiba IK-TF9C instruction manual Names and Functions

Contents

For Customer Use Following information is only for EU-member statesSafety Precautions Avoid setting in humid, smoky, vaporized or dusty places DisclaimerTable of Contents Components Names and Functions Connector Pin Assignments ConnectionStandard Connection Automatic White Balance Manual White Balance OperationWhite Balance Result displayed MeaningShutter speed mode is E.TRG mode Reasons. Such as no white area is included in an object, etcItems Controlled by Using on Screen Display Available selections Preset valueDisp Mode Setting by on Screen DisplayUsing the Menus TRG 1P SNR 1P SR TRG PW SNR TRG PW SRFlicker may be large MenusShutter Electronic shutter TRGChanging each setting in Manu mode Partial scanning settingChanging the shutter speed Changing each setting in SS synchro. scan mode Mode = SSChanging the shutter speed setting Changing the polarity of inputting trigger pulse setting Changing each setting in E.TRG modeChanging each setting in 1P SNR mode Changing 1P SNR exposure time settingChanging each setting in 1P SR mode Mode = E.TRG E.TRG = 1P SRChanging 1P SR exposure time setting Changing each setting in PW SNR mode Mode = E.TRG E.TRG = PW SNRChanging each setting in PW SR mode Mode = E.TRG E.TRG = PW SRChanging each setting in Gain Changing the gain in Manu modeGain Video gain WHT BAL White balance Changing master pedestal MANU/OFFChanging gamma correction Changing R pedestalChanging the manual shading correction setting Setting to factory setting statusChanging the shading correction mode OptionSynchro. Scan Operation Setting by the frameSetting by 2H Fval Lval DavlE. TRG External trigger 1P SNR 1 Pulse Trigger Sync Non Reset1 Pulse Trigger SYNC-NON Reset Picture Output Timing Fval Lval Dval1P SR 1 Pulse Trigger Sync Reset 1 Pulse Trigger SYNC-RESET Picture Output TimingPW SNR Pulse width trigger SYNC-NON Reset Pulse Width Trigger SYNC-NON Reset Picture Output TimingPW SR Pulse width trigger SYNC-RESET 1 Pulse Width Trigger SYNC-RESET Picture Output TimingPartial Scanning OFF All pixels scanning When Partial Scanning Mode is onPartial Read Partial Scanning onVertical Output Waveform Timing Chart Output Waveform Timing ChartHorizontal Output Waveform Timing Chart Fval LVAL、 DvalSpecifications RGB, 3CCDExternal Appearance Diagram Before Making a Service CallSymptom Items to be checked Limited One 1 Year Warranty of Labor and Parts Step-by-step Procedures How to Obtain Warranty ServiceImaging Systems Division