Manuals / Toshiba / Photography / Digital Camera

Toshiba IK-TF9C instruction manual Shutter speed mode is E.TRG mode

Models: IK-TF9C

1 32

Page 9

Result displayed	Meaning
AWB NG	Automatic white balance adjustment cannot be performed because the
NOT AVAILABLE	shutter speed mode is E.TRG mode.
AWB NG	Automatic white balance adjustment cannot be performed for other
	reasons. Such as no white area is included in an object, etc.

2MANU (Manual white balance)

•Set the MODE to MANU on the WHT BAL menu. (Refer to the item "7.2 (3) WHT BAL (white balance)".)

•Shoot a known white object, adjust the white balance adjusting the levels of R GAIN and B GAIN on the menu, confirming with a monitor etc.

(Refer to the item "7.2 (3) (3.2) Changing each setting in MANU (Manual) mode".)

Page 9

Image 9

Toshiba IK-TF9C Shutter speed mode is E.TRG mode, Reasons. Such as no white area is included in an object, etc

Contents

Following information is only for EU-member states For Customer UseSafety Precautions Disclaimer Avoid setting in humid, smoky, vaporized or dusty placesTable of Contents Components Names and Functions Connector Pin Assignments ConnectionStandard Connection White Balance OperationAutomatic White Balance Manual White Balance Result displayed MeaningReasons. Such as no white area is included in an object, etc Shutter speed mode is E.TRG modeAvailable selections Preset value Items Controlled by Using on Screen DisplayUsing the Menus Mode Setting by on Screen DisplayDisp TRG 1P SNR 1P SR TRG PW SNR TRG PW SRShutter Electronic shutter MenusFlicker may be large TRGChanging each setting in Manu mode Partial scanning settingChanging the shutter speed Changing each setting in SS synchro. scan mode Mode = SSChanging the shutter speed setting Changing each setting in 1P SNR mode Changing each setting in E.TRG modeChanging the polarity of inputting trigger pulse setting Changing 1P SNR exposure time settingChanging each setting in 1P SR mode Mode = E.TRG E.TRG = 1P SRChanging 1P SR exposure time setting Mode = E.TRG E.TRG = PW SNR Changing each setting in PW SNR modeMode = E.TRG E.TRG = PW SR Changing each setting in PW SR modeChanging each setting in Gain Changing the gain in Manu modeGain Video gain WHT BAL White balance Changing gamma correction MANU/OFFChanging master pedestal Changing R pedestalChanging the shading correction mode Setting to factory setting statusChanging the manual shading correction setting OptionSetting by 2H Setting by the frameSynchro. Scan Operation Fval Lval Davl1 Pulse Trigger SYNC-NON Reset Picture Output Timing 1P SNR 1 Pulse Trigger Sync Non ResetE. TRG External trigger Fval Lval Dval1 Pulse Trigger SYNC-RESET Picture Output Timing 1P SR 1 Pulse Trigger Sync ResetPulse Width Trigger SYNC-NON Reset Picture Output Timing PW SNR Pulse width trigger SYNC-NON Reset1 Pulse Width Trigger SYNC-RESET Picture Output Timing PW SR Pulse width trigger SYNC-RESETPartial Read When Partial Scanning Mode is onPartial Scanning OFF All pixels scanning Partial Scanning onHorizontal Output Waveform Timing Chart Output Waveform Timing ChartVertical Output Waveform Timing Chart Fval LVAL、 DvalRGB, 3CCD SpecificationsExternal Appearance Diagram Before Making a Service CallSymptom Items to be checked Limited One 1 Year Warranty of Labor and Parts Step-by-step Procedures How to Obtain Warranty ServiceImaging Systems Division

Result displayed

shutter speed mode is E.TRG mode.

reasons. Such as no white area is included in an object, etc.