Samsung HT-KQ20R/XFU, HT-TKQ25R/XFU manual Setting the Test Tone, Stop or no, Disc mode

Setting the Test Tone

Use the Test Tone feature to check the speaker connections.

Setting the DRC (Dynamic Range Compression)

This feature balances the range between the loudest and quietist sounds.

You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.

GB

In Stop or no	2	Press Cursor but-
disc mode,		ton to move to ‘Audio’
1 press MENU		and then press
		ENTER button.
button.

MOVE ENTER EXIT

MOVE ENTER EXIT

Press Cursor button

3 to move to ‘TEST TONE’ and then press ENTER button.

•The test tone will be sent to L ➝ C ➝ R ➝ SR ➝ SL ➝ SW in order.

If the ENTER button is pressed again at this time, the test tone will stop.

MOVE ENTER RETURN EXIT

1 In Stop or no disc mode, press MENU button.

MOVE ENTER EXIT

Press Cursor 2 button to move to

‘Audio’ and then press ENTER

button.

MOVE ENTER EXIT

Press Cursor 3 button to move to

4 Press Cursor

STOPEXIT

L: Front Speaker (L)	C: Center Speaker	SW: Subwoofer
R: Front Speaker (R)	SL: Rear Speaker (L)	SR: Rear Speaker (R)

Press RETURN button to return to the previous level.

‘DRC’ and then press ENTER button.

, to adjust the ‘DRC’.

•When the Cursor button is pressed, the effect is greater, and when the Cursor button is pressed, the effect is smaller.

SETUP

Press MENU button to exit the setup screen.

MOVE ENTER RETURN EXIT CHANGE RETURN EXIT

Press RETURN button to return to the previous level.

Press MENU button to exit the setup screen.

53 54