Listening to Radio
You can listen to the chosen band (FM broadcast stations) by using either the automatic or manual tuning operation.
Presetting Stations
Example: Presetting FM 89.1 in the memory
Remote Control Unit
1Press the TUNER button and select the FM band.
2 Tune in to the desired station.
1Press the TUNER button and select the FM band.
2 Press TUNING/CH
to select "89.10".
• Refer to Step 2 on page 79 to |
automatically or manually tune in |
3 Press the TUNER MEMORY button.
•“PRGM” flashes in the display.
Automatic Tuning 1
Automatic Tuning 2
Manual Tuning
When 
is pressed, a preset broadcast station is selected.
Press and hold TUNING/CH to automatically search for active broadcasting stations.
Briefly press TUNING/CH to increase or decrease the frequency incrementally.
TITLE | CHAP PRGM RDS RT | ST TUNED |
kHz MHz
to a station. |
TITLE | RDS RT | ST TUNED |
kHz MHz
TITLE | RDS RT | ST TUNED |
kHz MHz
Main Unit
Press |
|
|
|
| 5 | Press the TUNER | 6 | To preset another |
|
| |||||||
4 to select preset | MEMORY button | station, repeat | ||||||
number. |
| again. |
| steps 2 to 5. | ||||
1Press the Function button to select the desired band (FM).
2 Select a broadcast station.
Press the STOP (
) button to select PRE-
SET and then press button to select the preset station.
Automatic Tuning 2 Press the STOP (
) but-
ton to select "MANUAL"
and then press and hold | but- |
ton to automatically search the band.
Manual Tuning Press STOP (
) to select MANUAL and then briefly
press | to tune in to a lower or |
higher frequency.
• You can select between 1 and | • Press the TUNER MEMORY button before |
15 | ‘PRGM’ disappears from the display. |
•‘PRGM’ disappears from the display and the station is stored in memory.
TITLE | RDS RT | ST TUNED | TITLE | CHAP | RDS RT | ST TUNED |
|
| kHz |
|
|
| kHz |
|
| MHz |
|
|
| |
|
|
|
|
| MHz | |
|
|
|
|
|
|
Note | • Up to 15 stations can be saved in memory. | RADIO | |
OPERATION | |||
| If you save more than 15 stations, the oldest station previously saved is removed | ||
|
| ||
| and a new station is stored in its place. |
|
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
•Each time the button is pressed, the sound switches between "STEREO" and "MONO".
•In a poor reception area, select MONO for a clear,
To tune in to a preset station, press 
on the remote control to select a channel.
79 | 80 |
