Toshiba KV-KLR 1.3Rear Panel Connectors

7

1.3Rear Panel Connectors

The rear panel of the DVR unit contains virtually all of the connectors you will be using. Below is a diagram that outlines the location and description of each connector:

22 1 2 3 4 5 6 7

	8	9				15	16	17	19		21
			10 11		12 13
					14				18	20
											Figure 1.3
											KV-KLR Rear
Figure 1.3
1	110V / 220V Switch			For switching between 110V and 220V power supplies.
2	Alarm Outputs			There are 4 Alarm (Relay) Outputs on this DVR
3	Sensor Inputs			There are 4 Sensor Outputs on this DVR
4	RS-422 Interface			For connecting to a PAN/TILT/ZOOM camera.
5	RS-232 Interface			For connecting to a PAN/TILT/ZOOM camera.
6	RCA Video OUT			Composite out.
7	RG 59 Connector for Camera -			These BNC Connectors are used to connect the Live Output from a
	Input and Looping Outputs			camera to the DVR unit.
8	Power Supply Fan			Supplies Ventilation to the DVR unit.
9	AC Power Adapter			For connecting to an external power supply.
10	PS/2 Mouse Input (Mini-Din 6)			For connection to a Computer Mouse.
11	PS/2 Keyboard Input (Mini-Din 6)			For connection to a Keyboard.
12	USB Ports 1 and 2			For connection to USB Devices such as a Printer.
13	RJ-45 Network Jack			For connecting the unit to a network.
14	DB-9 Serial Input 1			Used for connection to a POS device.
15	LPT Parallel Printer Port			For connecting the unit to a Printer.
16	DB-15 SVGA Monitor Output			For connecting to a SVGA Monitor.
17	Audio Speaker Out			For a connecting to a Speaker.
18	Audio Microphone In			NOT USED
19	Audio Line In			For accepting audio inputs. Attach Audio Adapter here.
20	DB-15 Serial Port			For Connecting to Serial devices.
21	Power Switch			Turns the power to the DVR ON and OFF.
22	Secondary Power Switch			Turns off the power to the Power Supply