30

4.5.1Schedule Setup (Sensor)

1

2

3

4

5

6

7

Figure 4.5.1

KV-KLR Shown

8

9

10

Figure 4.5.1

1.Recording – Toggles to the Recording Window (default).

2.Sensor – Toggles to the Sensor Window. This window allows you to create schedules for the sensors attached to the DVR.

3.Day of the Week – Selects the day of the week for the schedule being made.

4.Single Selection Mode – Selects all days of the week at once.

5.Special Day Recording – Allows you to create special recording schedules for specific days.

6.Recording Schedule Window – Displays and allows you to edit the current Recording Schedule.

7.Enable/Disable – Enabled the selected Sensor for the time period specified.

8.Emergency Time – Specifies the amount of time (in seconds) to transmit the video in the Emergency Agent Software.

9.Emergency IP – Specifies the IP Address to the send the Emergency Agent video to.

10.Event – Allows you to define Motion as an Alarm Event, whether to transfer the Alarm Event to the SMS Multi- site Software, and/or whether to send the video to the Emergency Agent software.