Toshiba L450, L450D Software, Start, Mode *1, Hot keys, power off *1, power off *1, Plug and Play, Control Panel, Power Options, HDD automatic, Operating system, System automatic

L450/L450D

Software

The computer’s internal display panel supports high-resolution video graphics and can be set to a wide range of viewing angles for maximum comfort and readability.

Operating system	Windows® 7 is available. Refer to the preinstalled
	Software section at the front of this chapter.
TOSHIBA Utilities	A number of utilities and drivers are preinstalled
	to make your computer more convenient to use.
	Refer to the Utilities and applications section in
	this chapter.
Plug and Play	When you connect an external device to the
	computer or when you install a component,
	Plug and Play capability enables the system to
	recognize the connection and make the
	necessary configurations automatically.

Special features

The following features are either unique to TOSHIBA computers or are advanced features which make the computer more convenient to use.

Access each function using the following procedures.

*1 To access the Power Options, click Start -> Control Panel -> System and Security -> Power Options.

Hot keys	Hot keys are specific key combinations that let
	you quickly change the system configuration
	directly from the keyboard without running a
	system program.
Display automatic	This feature automatically cuts off power to the
power off *1	computer’s display panel when there is no
	keyboard input for a specified time, with power
	being restored the next time a key is pressed.
	This can be specified in the Power Options.
HDD automatic	This feature automatically cuts off power to the
power off *1	hard disk drive when it is not accessed for a
	specified time, with power being restored when
	the hard disk drive is next accessed. This can be
	specified in the Power Options.
System automatic	This feature automatically shuts down the system
Sleep/Hibernation	into either Sleep Mode or Hibernation Mode when
Mode *1	there is no input or hardware access for a
	specified time. This can be specified in the Power
	Options.

1-8 User’s Manual