L450/L450D

Sleep Mode

If you have to interrupt your work, you are able to turn off the power without exiting from your software by placing the computer into Sleep Mode. In this mode data is maintained in the computer’s main memory so that when you turn on the power again, you can continue working right where you left off.

When you have to turn off your computer aboard an aircraft or in places where electronic devices are regulated or controlled, always completely shut down the computer. This includes turning off any wireless communication switches or devices, and canceling settings that reactivate the computer automatically, such as a timer recording function. Failure to completely shut down the computer in this way could allow the operating system to reactivate and run pre-programmed tasks or preserve unsaved data, which could interfere with aviation or other systems, possibly causing serious injury.

■Before entering Sleep Mode, be sure to save your data.

■Do not install or remove a memory module while the computer is in Sleep Mode. The computer or the memory module could be damaged.

■Do not remove the battery pack while the computer is in Sleep Mode (unless the computer is connected to an AC power source). Data in memory could be lost.

■When the AC adaptor is connected, the computer will go into Sleep Mode according to the settings in the Power Options (to access it, Start ->Control Panel ->System and Security ->Power Options).

■To restore the operation of the computer from Sleep Mode, press and hold the power button or any key on the keyboard for a short amount of time. Please note that keyboard keys can only be used if the Wake-up on Keyboard option is enabled within the HW Setup utility.

■If the computer enters Sleep Mode while a network application is active, the application might not be restored when the computer is next turned on and the system returns from Sleep Mode.

■To prevent the computer from automatically entering Sleep Mode, disable Sleep Mode within the Power Options (to access it, Start ->Control Panel ->System and Security ->Power Options).

■To use the Hybrid Sleep function, configure it in the Power Options.

Benefits of Sleep Mode

The Sleep Mode feature provides the following benefits:

■Restores the previous working environment more rapidly than does the Hibernation Mode feature.

■Saves power by shutting down the system when the computer receives no input or hardware access for the time period set by the System Sleep Mode feature.

■Allows the use of the panel power off feature.

3-8

User’s Manual