27
Setting up your computer and getting started
RG 5.375 x 8.375 ver 2.3.3
Static electricity can damage the memory module. Before you handle
the module, touch a grounded metal surface to discharge any static
electricity you may have built up.
To avoid damaging the memory module, be careful not to touch its
pin connector on the side you insert into the computer.
6Remove the new memory module from its antistatic
packaging.
7Insert the memory module in the slot and gently press it
down into place.
The clips on either side of the module will click to secure
the module.
Inserting the memory module into the slot
8Replace the cover plate and the screws.
9Turn the computer over and restart it.
When you turn on the computer, it automatically
recognizes the additional memory.
Removing a memory moduleIf you need to remove a memory module:
1Complete steps 1 through 6 in “Installing additional
memory (optional)” on page 25 to shut down the
computer and open the memory module cover.
2Pull the clips away from the memory module.
The memory module pops partially out of the slot.