37
Mobile computing
RG 5.375 x 8.375 ver 2.3.3
When handling a battery, be careful not to drop it or short-circuit its
terminals.
To change the battery:
1Save your work.
2Shut down and turn off the computer.
3Remove all cables connected to the computer.
4Turn the computer over.
5If the battery lock is in the locked position (towards the
center of the computer), slide it towards the edge of the
computer to unlock it.
6Slide the battery release latch to release the battery.
Battery release latch
7Pull the discharged battery module out of the computer.
Removing the discharged battery
If the battery is leaking or its case is cracked, put on protective
gloves to handle it, and discard it immediately following the advice
in the electronic user’s guide.
8Insert the charged battery into the slot until the latch
clicks.