39
Mobile computing
RG 5.375 x 8.375 ver 2.3.3
When you install the battery pack, you should hear a
click when it is seated properly.
Do not expose the battery pack to fire. The battery pack
could explode.
Maximizing battery life
To maximize the life of your battery pack:
At least once a month, disconnect the computer from a
power source and operate it on battery power until the
battery pack fully discharges. Before doing so, follow the
steps below:
1Turn off the computer’s power.
2Disconnect the AC adapter and turn on the
computer’s power. If it does not turn on, go to step 4.
3Operate the computer on battery power for five
minutes. If the battery pack has at least five minutes
of operating time, continue operating until the battery
pack is fully discharged. If the battery light LED
flashes or there is some other warning to indicate a
low battery, go to step 4.
4Connect the AC adapter to the computer and the
power cord to a power outlet. The DC-IN or AC
power-light LED should glow green, and the Battery
LED should glow amber to indicate that the battery
pack is being charged. If the DC-IN or AC power-
light indicator does not glow, power is not being
supplied. Check the connections for the AC adapter
and power cord.
5Charge the battery pack until the Battery LED glows
green.
If you have extra battery packs, rotate their use.
If you will not be using the system for an extended
period, more than one month, remove the battery pack.
Disconnect the AC adapter when the battery is fully
charged. Overcharging makes the battery hot and
shortens life.
If you are not going to use the computer for more than
eight hours, disconnect the AC adapter.