HW SETUP

User's Manual

This procedure does not affect the settings.

❑Use hot keys.

1.Hold down F12 and boot the computer.

2.The following menu will be displayed with the following icons: Built-in HDD, CD-ROM, FDD ( or SD memory card), Network (LAN), PCA (ATA) card boot.

NOTE: A bar will appear only under the selected device.

3.Use the left/right cursor keys to highlight the boot device you want and press

Enter.

NOTES: 1. If a supervisor password is set, the menu above does not appear when you use the user password to start the computer.

2.The selection method above does not change the boot priority settings in HW Setup.

3.If you press a key other than one of those above or if the selected device is not installed, the system will boot according to the current setting in HW Setup.

HDD Priority Options

This option sets the priority for booting the computer from the HDD. Select from the following settings:

Built-in HDD −> PC Card (Default)

The computer will look for the Built-in HDD first, next the the PC Card (Default).

PC Card −> Built-in HDD

The computer will look for the PC Card first, next the Builtin HDD.

NOTE: If a boot command is not found on the first detected HDD, the system will not boot from the other HDD. It will search the next device in the boot priority for a boot command.

7-4