Mega Catch MCP800 operation manual Problem Solving, Need Help? Specifications

Problem Solving

If your Mega-Catch™ Mosquito Trap fails to operate:

•Check that the Power Cable is properly connected to both the Trap and the mains, and that the power is switched on.

•Check that the power cable has not been damaged, e.g. by a lawn mower or animals (squirrels, dogs or racoons).

•Check that the Programmable Timer is set to the "ON" position.

•Check that the Programmable Timer, if set to AUTO, is set to operate at the time you are checking its operation.

If these steps fail then email us at info@megacatch.com - or call the Service Centre number shown on the separate Warranty Certificate.

If the lights in the Mega-Catch™ Mosquito Trap come on but the Fan fails to operate:

•Check whether there has been a build up of material in the Fan and/or Fan Safety Guard which is preventing the Fan blade from turning (Refer to Page 13 - Care of Your Trap section).

If these steps fail then email us at info@megacatch.com - or call the Service Centre number shown on the separate Warranty Certificate.

NOTE: Do not attempt to access the internal electronic components of your Mega-Catch™ Mosquito Trap. Opening of sealed units will void your warranty.

Need Help?

For service, repair or any questions concerning Mega-Catch™ products, email us at info@megacatch.com - or call the Service Centre number shown on the separate Warranty Certificate. Do NOT return products to the place of purchase. Do NOT return products to an Authorized Distributor. You may also want to consult our website: www.megacatch.com.

Specifications

Power Source	AC Adaptor YL-25-12	U.S. Design Patent No:	449,091
CSA Listing	E207075 37XZ	U.S. Patent No:	6,199.316
Input	120V AC 60Hz	U.S. Trade Mark Reg. No:	2,679,688
Output	12V AC 2.08A 25W

22