12.Your PREMIER Trap comes with a low-voltage transformer and a 60-foot (18-meter) low-voltage extension cord with weatherproof connectors. Plug the extension cord into the Trap connection turning the connector clockwise until tight. Plug the extension cord into the transformer cable turning the connector clockwise until tight.
Then plug into the power supply.
(NOTE: The connectors are designed to be a tight fit to ensure that they are weatherproof.)
13.Turn on the power. A display should appear on the face of the Timer. (If it does not, see Page 8 - Operation of the Programmable Timer section). Set the Timer to "ON" for continuous running or to "AUTO" to program operating times. See Page 8 - Operation of the Programmable Timer section for programming instructions.
14.When the Trap is operating, the Fan should be running, the four diode lights should be flashing intermittently and the U.V. Bulb light should be on. If the Trap is not operating correctly then re-read these instructions or refer to Page 22 - Problem Solving section or email us at info@megacatch.com.
What Your Mega-Catch™ Mosquito Trap Will Do
Your Mega-Catch™ Mosquito Trap is designed to reduce mosquito populations, but it will not permanently eliminate them. Operate the Mega-Catch™ Mosquito Trap daily for several weeks. Over this time you should notice a decline in mosquito numbers. This means your Trap is doing its job.
The Mega-Catch™ Mosquito Trap is not designed to compete with humans in close proximity eg: at a barbecue. If you are planning an outdoor function, operate the Trap for several days before the function.
NOTE: Your Mega-Catch™ Mosquito Trap should be used in conjunction with other sensible control measures designed to manage mosquito problems.
