Mega Catch MCP800 operation manual Fitting of External Skirt, Method One, Fitting External Skirt

Fitting of External Skirt

Your Mega-Catch™ Mosquito Trap comes with an External Skirt which fulfils two important functions. First its color and texture provides a visual attractant for several species of mosquitoes. Secondly, it acts as a baffle directing the air plume out of the bottom of the Trap.

There are two methods which you can use to fit the Skirt (Method One is the easiest):

Method One:

1.Place the Mega-Catch™ Mosquito Trap on a table or other flat surface.

2.Slide the Skirt on from the top of the Trap (over 2 corners initially) with the elastic band at the top.

3.The Skirt is properly fitted when the elastic band is seated over the lower horizontal rib, just below the inlet holes (see figure 5). The opening in the Skirt should be located at the front of the Trap so as to facilitate removal of the Door without having to remove the Skirt. The hook-and-loop fastening on this opening should be closed when the Trap is running.

FIG 5 - Fitting External Skirt

External Skirt

Hook-and-loop fastening

12