Mega Catch MCP800 operation manual Using the Catch Bag, Fitting of Catch Bag

Models: MCP800

1 26
Download 26 pages 11.3 Kb
Page 13
Image 13
Using the Catch Bag

Using the Catch Bag

To prepare your Mega-Catch™ Mosquito Trap, follow these steps:

1.Ensure that the Trap is switched off by disconnecting the power (Attention: High-

Speed Fan inside the Trap may cause injury if the power is not disconnected.)

2.Unlock and remove the Lockable Door.

3.Reach inside the Trap and stretch the open neck of the Catch Bag around the corners of the base of the Fan just above the Fan Safety Guard (see figure 4). The Catch Bag has an elastic neck to facilitate attachment.

4.Replace and lock the Door and remove the Key for child safety. Reconnect power.

5.Before removing the Catch Bag, remember to disconnect the power to your Mega- Catch™ Mosquito Trap off so that the Fan is not operational. Then pull the drawstring tight so that any mosquitoes that remain alive cannot escape. Crush the top of the Catch Bag down on its base to kill any mosquitoes that do remain alive. Dispose of the contents well away from your dwelling so as not to attract ants.

Mosquitoes collected in the Catch Bag will usually die very quickly without access to moisture. In cooler climates they may live for a longer period. In times of heavy infestations of mosquitoes, it may be necessary to empty the Catch Bag on a regular basis in order to ensure optimum operation of the Trap.

FIG 4 - Fitting of Catch Bag

Stretch open neck of Catch Bag over corners of fan housing base.

Tra p

Fan Housing

Catch Bag

Catch Bags should be hand washed in warm soapy water from time to time. Catch Bags are a consumable item and replacements are available from your Authorized Distributor.

11

Page 13
Image 13
Mega Catch MCP800 operation manual Using the Catch Bag, Fitting of Catch Bag