Mega Catch MCP800 operation manual Operation of the Programmable Timer, How to Program, Mega Catch

Operation of the Programmable Timer

Your Mega-Catch™ Mosquito Trap is equipped with a high tech Programmable Timer. The Timer enables you to program the Trap to operate at times when mosquitos are most active in your area.

The timer is equipped with an automatically recharging battery. This battery can operate for up to three months when fully charged. Your Mega-Catch™ Mosquito Trap may need several hours of running to charge up the battery upon initial use.

NOTE: If no display appears on the Programmable Timer when the power is switched on, the battery may be discharged. To fully recharge the battery, run the Trap for 24 hours.

You can choose to operate the Mega-Catch™ Mosquito Trap in 3 ways:

1.ON – The Mega-Catch™ Mosquito Trap will run 24 hours a day while connected to a power source.

2.OFF – the Mega-Catch™ Mosquito Trap will not operate.

3.AUTO – you can program when the Mega-Catch™ Mosquito Trap will start and stop.

How to Program:

FIRST SET THE TIME.

To set the day and time, press and hold the CLOCK button while pressing the DAY or HOUR or MINUTE button (as the case requires). This is the only function that requires two buttons to be pressed at once.

THEN PRESS PROGRAM TO START PROGRAMMING.

		Mega Catch
	AM	Fr
		12:3333
R		RESET
		RECALL

Start time program 1. Enter start time with HOUR/MINUTE buttons. For 7 days per week operation select the DAY display, which shows all 7 days.

For individual day operation select the DAY display desired, e.g. Su for Sunday.

THEN PRESS PROGRAM.

Stop time program 1. Enter stop time with HOUR/MINUTE buttons.

THEN PRESS PROGRAM.

FIG 3.1

Mega Catch
AM	Mo Tu We Th	Fr	Sa Su
	_
1 ON
R	RESET
	RECALL

FIG 3.2

8