Do not operate Corel Digital Studio immediately after turning on the computer. Please wait until all Disc Drive activity has stopped.

CD recorder, DVD-Audio, Video CD functions are not supported in this version.

Do not run software like a screen saver because it can put a heavy load on the CPU.

Do not support mp3 decode and encode. DVD-VR format is not supported in this version.

Before recording the video to DVD or Blu-ray Disc™

When you record DVD disc or Blu-ray Disc™, please use only discs recommended by the Drive manufacturer.

Do not set the working drive to a slow device like a USB1.1 hard disk drive or it will fail to write DVD or Blu-ray Disc™.

Do not perform any of the following actions:

Operate the computer for any other function, including using a mouse or Touch Pad, or closing/opening the display panel.

Bump or cause vibration to the computer.

Use the Mode control button and Audio/Video control button to reproduce music or voice.

Open the optical disc drive.

Install, remove or connect external devices, including the following: memory media card, USB device, external display, optical digital devices.

Please verify your disc after recording important data. Not support to output VCD and SVCD format.

Force eject disc.

About recorded DVDs and Blu-ray™ discs

Some DVD-ROM drives for personal computers or other DVD players may not be able to read DVD-R/+R/-RW/+RW/-RAM discs.

When playing your recorded DVD on your computer, please use the TOSHIBA VIDEO PLAYER software application or TOSHIBA Blu-ray Disc Player software application.

When playing your recorded Blu-ray Disc™ on your computer, please use the TOSHIBA Blu-ray Disc Player software application.

If you use an over-used rewritable disc, the full formatting might be locked. Please use a brand new disc.

TOSHIBA VIDEO PLAYER

Please be aware of the following limitations when you use the TOSHIBA VIDEO PLAYER:

Notes on use

This software can only be used on Windows 7.

User's Manual

3-15