Toshiba M9 Touch Pad/AccuPoint, Dual Pointing device, OK, Start, Start, Problem, Control, Buttons, Control, Procedure, Sound -> Mouse icon, the Pointer Options tab

Troubleshooting

Dual Pointing device

If you are using a USB mouse, you should also refer to both the USB device section in this chapter, and the documentation supplied with your mouse.

Touch Pad/AccuPoint

Problem	Procedure
Either the Touch Pad	Check the Device Select settings.
or the AccuPoint does	Click Start ->Control Panel ->Hardware and
not work.
	Sound ->Mouse icon.
	Pressing FN + F9 to enables.
On-screen pointer does	In this instance the system might be busy - Try
not respond to pointing	moving the mouse again after waiting a short
device operation	while.
Double-tapping	In this instance, you should initially try changing
(Touch Pad) or	the double-click speed setting within the Mouse
double-clicking	Control utility.
(AccuPoint) does not	1. To access this utility, click Start -> Control
work
	Panel ->Hardware and Sound ->Mouse
	icon.
	2. Within the Mouse Properties window, click
	the Buttons tab.
	3. Set the double-click speed as required and
	click OK.
The mouse pointer	In this instance, you should initially try changing
moves too fast or too	the speed setting within the Mouse Control utility.
slow	1. To access this utility, click Start -> Control
	Panel ->Hardware and Sound ->Mouse
	icon.
	2. Within the Mouse Properties window, click
	the Pointer Options tab.
	3. Set the pointer speed as required and click
	OK.
	If you are still unable to resolve the problem,
	contact your reseller, dealer or service provider.

User’s Manual 8-12