43
TV operation
Press MENU in the TV mode, then press or
to select AUDIO menu.
1
Press RETURN to clear the menu screen.
4
2Press or to select “DIGITAL OUTPUT”.
Use this feature to select the digital audio output format
when you connect a Dolby Digital decoder or other
digital audio system to the coaxial digital audio output
on the TV.
Selecting the digital output
Press or to select “PCM” or “DOLBY
DIGITAL”.
3
Resetting your audio adjustments
Press MENU in the TV mode, and then press
or to select AUDIO menu.
1
Press or to select “RESET”, and then
press .
2
The RESET function returns the audio adjustments to
the following factory settings:
Bass ................. center (25)
Treble ...............
center (25)
Balance .............. center (0)
Press RETURN to clear the menu screen.
3
Selecting the digital output /
Resetting your audio adjustments /
Checking the digital signal strength
Checking the digital signal strength
Press MENU in the TV mode, then press or to
select SETUP menu. Press or to select
“SIGNAL METER”, then press .
SIGNAL METER
CHANNEL (DIGITAL) 1-001
80
You can check the strength of the digital signal by
viewing the digital signal meter.
Notes:
•Signal meter feature is not available for analog channels.
•After approximately 4 minutes, SIGNAL METER screen will
return to normal TV-operation automatically.
•When you select a vacant channel, the signal meter may
react.
MENU
RETURN
/ / /